Browse image gallery
Description
RedNet A8R provides eight channels of analogue input and output with high quality 24-bit, 192kHz A/D and D/A digital conversion with up to 119dB dynamic range, plus two channels of AES/EBU digital I/O, to and from the Dante network. Presented in a rugged, 1U all-metal enclosure uniform with other products in the RedNet range, RedNet A8R is appropriate for fixed installation in engineered audio and communications systems.
RedNet A8R offers conversion that is remotely software-selectable at standard rates Ð 44.1, 48, 88.2, 96, 176.4 and 192kHz at 24-bit resolution, with pull-up/down capability. Electronically-balanced analogue inputs and outputs are on DB25 connectors wired to AES59 specifications, and internal signals are balanced throughout. Inputs may be remotely configured for either +18 or +24 dBFS signal levels.
In addition, two channels of AES/EBU I/O with input sample rate conversion are provided on XLR connectors. The clock source for the unit may be internal, or externalvia Word Clock or DARS (via the XLR input). RedNet A8R also outputs Word Clock, with Word Clock in and out on BNC connectors.
Sampling rate and operating levels are selected remotely from RedNet Control software. Comprehensive front-panel LEDs include PSU and network status, sample rate and per-channel tri-colour (red-amber-green) signal level indication. Green 'signal present' indicators are provided for the AES/EBU I/O, and three Clock Source indicators show Internal, Word Clock and DARS.
RedNet A8R features power and network redundancy, with two separate universal (100 - 240V) PSUs including IEC connectors with retaining clips, plus dual network interfaces on locking etherCON connectors, which can be set remotely to Redundant or Switched (daisy-chain) mode.
RedNet A8R features soft-startup on power-up and auto-muting during sample rate alteration, to avoid audible clicks and pops.
RedNet A8R is CE marked, UL/C-UL listed, and incorporates AES48-2005 Grounding and EMC practices. The platform complies with EU Directive 2002/95/IEC, the RoHS Directive.
Key Features:
- Eight channels of high-quality line-level analogue I/O
- 24-bit precision Focusrite conversion up to 192kHz
- 119dB dynamic range, flat from 20Hz - 20kHz, +/-0.15dB
- Internally balanced throughout
- Dante-based remote-controlled audio-over-IP connectivity
- Dual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliability
- Word Clock I/O and DARS for increased flexibility plus an additional two channels of AES/EBU I/O
- Analogue I/O to AES59 standard on DB25 connectors
- Comprehensive front-panel indicators
- Software-based routing and control — no hardware patching required
8x8 analogue I/O with dual PSUs
RedNet A8R is a 1U, 8x8 analogue line-level I/O interface for any Dante audio-over-IP network. Featuring network and power supply redundancy, RedNet A8R is the ideal choice for providing analogue I/O in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio.
High-quality conversion with up to 119dB of dynamic range is provided through two rear-panel DB25 connectors while an additional pair of AES3 I/O is provided through male and female XLR for added flexibility. Word Clock I/O on BNC connectors allows external devices to clock to RedNet A8R, or alternatively allows RedNet A8R to act as a network clock grand master slaved to external input. Power is supplied through a pair of locking IEC power inlets, and network connections are provided with a pair of locking Neutrik etherCON connectors; providing redundant operation or daisy-chained operation.
Brainworx bx_console
The Focusrite Studio Console reborn in your DAW
Enjoy 3 years of warranty
Line input
- 0 DBFS Reference Input Levelselements 18 or 24dBu (switchable)
- Frequency Response Inputs20Hz – 20kHz ± 0.1dB
- THD N Inputs<-130db (0.00003)< span>-130db>
- EIN-96dBu A-Weighted (typical)
- Signal-To-Noise Ratio120dB A-Weighted (typical)
- Converter Dynamic Range120dB A-Weighted (typical), 10Hz – 20kHz
Line outputs
- 0 DBFS Reference Levels18 or 24dBu (switchable)
- Frequency Response20Hz – 20kHz ± 0.1dB
- THD N<-100db (0.001) unweighted, 20hz – 20khz; 23dbu input< span>-100db>
- Noise In Presence Of Signal-94dBu A-Weighted (typical)
- Dynamic Range118 dB A-Weighted (typical)
Digital input sample rate converters
- Sample Rate Range32kHz to 216kHz
- Gain Error-0.3dB
- Dynamic Range Inputs>138dB
- Latency11 to 45 samples (network and sample rate dependent)
Digital performance
- Supported Sample Rates44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit
- Clock SourcesInternal or from Dante Network Master
- External Word Clock RangeNominal sample rate ±7.5
Rear panel connectivity
- Line Inputs1 x DB-25 connectors Analogue Outputs
- Line Outputs1 x DB-25 connectors
- Channel Count2 x 2 AES/EBU channels
- Input (Optional DARS)1 x Female XLR
- Output1 x Male XLR
- Word Clock Input1 x BNC 75O port (switchable termination)
- Word Clock Output1 x BNC 75O port
- PSU2 x Internal, 100-240V, 50/60Hz, consumption 24W
- Network2 x etherCON NE8FBH, also compatible with standard RJ45 connectors
Network modes
- RedundantAllows unit to connect to two independent networks
- SwitchedConnects both ports to integrated network switch allowing daisy-chaining of devices